Thursday, November 21, 2013

Megger

The megger is an instrument used for the measurement of high resistance and insularity resistance, Essentially the Magger insulation tester consists of a hand-driven d.c. generator and a direct reading true ohmmeter. A simplified stack of electrical connections of the instrument is shown in fig. 6.242 Permanent magnets provide the theatre for both the generator & the ohm-meter. The moving element of the ohm-meter consist of triple waves known as real (or deflecting) curlicue, jam (or apply) coil and compensating coil, which atomic number 18 mounted rigidly to a pivoted central shaft and which argon free to rotate over a stationary C-shaped crusade core. The coils are connected to the circuit by means of rubber band leads (or ligaments) that exert no restoring torque on the moving element. and so the moving element may take up some(prenominal) position over the scale when the generator handle is stationary. The sure (or deflection) coil is connected in series with the resistance R between one generator last-place and the test storehouse marked L. The series resistance R protects the current (or deflecting) coil in case the test terminals are short-circuited and also take hold the range of the instrument.
Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
The printing press (or control) coil in series with a compensating coil and protection resistance R is connected crosswise the generator terminals. Compensating coil is provided to obtain better scale proportions and to watch out the instrument a static. When the current from the generator flows finished pressure coil, the coil tends to set itself at right angles to the field of the unconque! rable magnet. With the test terminals open, corresponding to infinite resistance, no current flows done deflecting coil. The pressure coil thus governs the motion of the moving element, bugger off it to move to its extreme counter-clockwise position. The point on the scale indicated by the pointer under this condition is marked infinite resistance. license coil is wound to produce clockwise torque on the...If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment